ED 0822 – monolitní VHM vrták – 8xD
VHM monolitní dlouhý vrták pro vrtání do oceli, astenitické oceli a litiny v rozsahu průměrů Ø 3,0 – Ø 20,0 mm pro vrtanou hloubku 8xD. Vrták má „4 vodící fasety“, vnitřní chlazení a je povlakován vícevrstvým povlakem na bázi TiAlN.
| Obj. číslo | D1 h7 mm | D2 h6 mm | L1 mm | L2 mm | Cena Kč/ks |
|---|---|---|---|---|---|
| ED.0822.3357.030 | 3.0 | 6 | 72 | 34 | 2041,- |
| ED.0822.3357.031 | 3.1 | 6 | 72 | 34 | 2041,- |
| ED.0822.3357.032 | 3.2 | 6 | 72 | 34 | 2041,- |
| ED.0822.3357.033 | 3.3 | 6 | 72 | 34 | 2041,- |
| ED.0822.3357.034 | 3.4 | 6 | 72 | 34 | 2041,- |
| ED.0822.3357.035 | 3.5 | 6 | 72 | 34 | 2041,- |
| ED.0822.3357.036 | 3.6 | 6 | 72 | 34 | 2041,- |
| ED.0822.3357.037 | 3.7 | 6 | 72 | 34 | 2041,- |
| ED.0822.3357.038 | 3.8 | 6 | 81 | 43 | 2041,- |
| ED.0822.3357.039 | 3.9 | 6 | 81 | 43 | 2041,- |
| ED.0822.3357.040 | 4.0 | 6 | 81 | 43 | 2041,- |
| ED.0822.3357.041 | 4.1 | 6 | 81 | 43 | 2041,- |
| ED.0822.3357.042 | 4.2 | 6 | 81 | 43 | 2041,- |
| ED.0822.3357.043 | 4.3 | 6 | 81 | 43 | 2041,- |
| ED.0822.3357.044 | 4.4 | 6 | 81 | 43 | 2041,- |
| ED.0822.3357.045 | 4.5 | 6 | 81 | 43 | 2041,- |
| ED.0822.3357.046 | 4.6 | 6 | 81 | 43 | 2041,- |
| ED.0822.3357.047 | 4.7 | 6 | 81 | 43 | 2041,- |
| ED.0822.3357.048 | 4.8 | 6 | 95 | 57 | 2041,- |
| ED.0822.3357.049 | 4.9 | 6 | 95 | 57 | 2041,- |
| ED.0822.3357.050 | 5.0 | 6 | 95 | 57 | 2041,- |
| ED.0822.3357.051 | 5.1 | 6 | 95 | 57 | 2041,- |
| ED.0822.3357.052 | 5.2 | 6 | 95 | 57 | 2041,- |
| ED.0822.3357.053 | 5.3 | 6 | 95 | 57 | 2041,- |
| ED.0822.3357.054 | 5.4 | 6 | 95 | 57 | 2041,- |
| ED.0822.3357.055 | 5.5 | 6 | 95 | 57 | 2041,- |
| ED.0822.3357.056 | 5.6 | 6 | 95 | 57 | 2041,- |
| ED.0822.3357.057 | 5.7 | 6 | 95 | 57 | 2041,- |
| ED.0822.3357.058 | 5.8 | 6 | 95 | 57 | 2041,- |
| ED.0822.3357.059 | 5.9 | 6 | 95 | 57 | 2041,- |
| ED.0822.3357.060 | 6.0 | 6 | 95 | 57 | 2041,- |
| ED.0822.3357.061 | 6.1 | 8 | 114 | 76 | 2541,- |
| ED.0822.3357.062 | 6.2 | 8 | 114 | 76 | 2541,- |
| ED.0822.3357.063 | 6.3 | 8 | 114 | 76 | 2541,- |
| ED.0822.3357.064 | 6.4 | 8 | 114 | 76 | 2541,- |
| ED.0822.3357.065 | 6.5 | 8 | 114 | 76 | 2541,- |
| ED.0822.3357.066 | 6.6 | 8 | 114 | 76 | 2541,- |
| ED.0822.3357.067 | 6.7 | 8 | 114 | 76 | 2541,- |
| ED.0822.3357.068 | 6.8 | 8 | 114 | 76 | 2541,- |
| ED.0822.3357.069 | 6.9 | 8 | 114 | 76 | 2541,- |
| ED.0822.3357.070 | 7.0 | 8 | 114 | 76 | 2541,- |
| ED.0822.3357.071 | 7.1 | 8 | 114 | 76 | 2541,- |
| ED.0822.3357.072 | 7.2 | 8 | 114 | 76 | 2541,- |
| ED.0822.3357.073 | 7.3 | 8 | 114 | 76 | 2541,- |
| ED.0822.3357.074 | 7.4 | 8 | 114 | 76 | 2541,- |
| ED.0822.3357.075 | 7.5 | 8 | 114 | 76 | 2541,- |
| ED.0822.3357.076 | 7.6 | 8 | 114 | 76 | 2541,- |
| ED.0822.3357.077 | 7.7 | 8 | 114 | 76 | 2541,- |
| ED.0822.3357.078 | 7.8 | 8 | 114 | 76 | 2541,- |
| ED.0822.3357.079 | 7.9 | 8 | 114 | 76 | 2541,- |
| ED.0822.3357.080 | 8.0 | 8 | 114 | 76 | 2541,- |
| ED.0822.3357.081 | 8.1 | 10 | 142 | 95 | 3273,- |
| ED.0822.3357.082 | 8.2 | 10 | 142 | 95 | 3273,- |
| ED.0822.3357.083 | 8.3 | 10 | 142 | 95 | 3273,- |
| ED.0822.3357.084 | 8.4 | 10 | 142 | 95 | 3273,- |
| ED.0822.3357.085 | 8.5 | 10 | 142 | 95 | 3273,- |
| ED.0822.3357.086 | 8.6 | 10 | 142 | 95 | 3273,- |
| ED.0822.3357.087 | 8.7 | 10 | 142 | 95 | 3273,- |
| ED.0822.3357.088 | 8.8 | 10 | 142 | 95 | 3273,- |
| ED.0822.3357.089 | 8.9 | 10 | 142 | 95 | 3273,- |
| ED.0822.3357.090 | 9.0 | 10 | 142 | 95 | 3273,- |
| ED.0822.3357.091 | 9.1 | 10 | 142 | 95 | 3273,- |
| ED.0822.3357.092 | 9.2 | 10 | 142 | 95 | 3273,- |
| ED.0822.3357.093 | 9.3 | 10 | 142 | 95 | 3273,- |
| ED.0822.3357.094 | 9.4 | 10 | 142 | 95 | 3273,- |
| ED.0822.3357.095 | 9.5 | 10 | 142 | 95 | 3273,- |
| ED.0822.3357.096 | 9.6 | 10 | 142 | 95 | 3273,- |
| ED.0822.3357.097 | 9.7 | 10 | 142 | 95 | 3273,- |
| ED.0822.3357.098 | 9.8 | 10 | 142 | 95 | 3273,- |
| ED.0822.3357.099 | 9.9 | 10 | 142 | 95 | 3273,- |
| ED.0822.3357.100 | 10.0 | 10 | 142 | 95 | 3273,- |
| ED.0822.3357.102 | 10.2 | 12 | 162 | 114 | 4331,- |
| ED.0822.3357.105 | 10.5 | 12 | 162 | 114 | 4331,- |
| ED.0822.3357.110 | 11.0 | 12 | 162 | 114 | 4331,- |
| ED.0822.3357.115 | 11.5 | 12 | 162 | 114 | 4331,- |
| ED.0822.3357.120 | 12.0 | 12 | 162 | 114 | 4331,- |
| ED.0822.3357.125 | 12.5 | 14 | 178 | 131 | 6064,- |
| ED.0822.3357.130 | 13.0 | 14 | 178 | 131 | 6064,- |
| ED.0822.3357.135 | 13.5 | 14 | 178 | 131 | 6064,- |
| ED.0822.3357.140 | 14.0 | 14 | 178 | 131 | 6064- |
| ED.0822.3357.145 | 14.5 | 16 | 203 | 152 | 8085,- |
| ED.0822.3357.150 | 15.0 | 16 | 203 | 152 | 8085,- |
| ED.0822.3357.155 | 15.5 | 16 | 203 | 152 | 8085,- |
| ED.0822.3357.160 | 16.0 | 16 | 203 | 152 | 8085,- |
| ED.0822.3357.165 | 16.5 | 18 | 222 | 171 | 9548,- |
| ED.0822.3357.170 | 17.0 | 18 | 222 | 171 | 9548,- |
| ED.0822.3357.175 | 17.5 | 18 | 222 | 171 | 9548,- |
| ED.0822.3357.180 | 18.0 | 18 | 222 | 171 | 9548,- |
| ED.0822.3357.185 | 18.5 | 20 | 243 | 190 | 11223,- |
| ED.0822.3357.190 | 19.0 | 20 | 243 | 190 | 11223,- |
| ED.0822.3357.195 | 19.5 | 20 | 243 | 190 | 11223,- |
| ED.0822.3357.200 | 20.0 | 20 | 243 | 190 | 11223,- |
Nutno předvrtat „pilotním vrtákem“ ED 0543 do hloubky 3xD-5xD
Příklad objednávky: ED.0822.3357.050 – VHM vrták Ø 5.0 x 8xD 1 ks
Katalogový list vrtáků ED 0822 + doporučené řez. podmínky
Pilotní navrtání otvoru od hloubky 16xD a více
V případě použití vrtáků přesahující hloubkou 16xD a více je nutno předvrtat otvor – použít tzv. „PILOTNÍ VRTÁK” s označením ED 0543 do hloubky min. 5xD. Tyto pilotní vrtáky jsou větší oproti vrtanému otvoru o 0,02 mm na průměru a po předvrtání použijete požadovaný dlouhý vrták 16xD – 50xD.
Příklad:
zadání: Ø 5,0 x 80 mm (ocel tř. 12)
Postup: – pilotním vrtákem ED 0543 Ø 5,02 x 82/44 mm předvrtáme otvor do hloubky 5xD. Následně použijeme dlouhý vrták ED 1633 Ø 5,0 x 130/90 mm. Tímto dlouhým vrtákem s otáčkami 20 ot./min. přijedeme cca 1,0 mm od předvrtaného otvoru, zvýšíme otáčky na 6688 ot./min., pustíme vnitřní chlazení (40 BAR) a posuvem 0,1 mm/ot. vyvrtáme otvor 16xD vrtákem do požadované hloubky.
Po vyvrtání otvoru vysuneme vrták zpět do plohy před začátkem vrtání, snížíme otáčky na 20 ot./min., vypneme vnitřní chlazení a vrtákem odjedeme z otvoru ven.
